Precision Drives Office Machines Computers Transmission Belt P14M series Synchronous Timing Belts
The P14M parabolic toothed synchronous belt is a widely used belt type in the synchronous belt transmission series, mainly used in small packages and high-speed operation, with the characteristics of space saving and high stability.
Circular tooth form:
The P14M synchronous belt adopts a circular tooth design, which helps to provide a more stable transmission effect and reduce slipping and wear.
Elastic support and tooth bonding:
This synchronous belt combines elastic support and tooth durability, allowing it to withstand high tension and pressure while maintaining lightweight and flexibility.
High transmission efficiency:
The P14M parabolic toothed synchronous belt has a high transmission efficiency, which can more effectively transmit motion and power, reducing energy loss.
Constant transmission ratio:
Due to the lack of relative sliding between the synchronous belt and the pulley, the P14M synchronous belt can provide a constant transmission ratio, ensuring accuracy and stability of transmission.
Accurate positioning:
The P14M synchronous belt is suitable for situations that require precise positioning, such as precision drives, office machines, and computers.
Small pulley diameter:
The P14M belt allows for the use of small pulley diameters (from 6mm diameter), which gives it an advantage in space limited situations.
High speed operation:
The P14M synchronous belt is suitable for high-speed operation, with a speed of up to 20000 revolutions per minute.
When using the P14M parabolic toothed synchronous belt, the following points should be noted:
Align gears:
Ensure that the synchronous belt is aligned with the gear of the pulley to avoid slipping and wear caused by poor gear engagement.
Control tension:
Maintain appropriate tension to avoid deformation or damage to the synchronous belt caused by excessive tension or looseness.
Regular cleaning:
Regularly clean the synchronous belt to remove grease and other dirt, avoiding dirt from entering the interior of the synchronous belt and damaging its structure.
Check the gear engagement: Check the gear engagement in a timely manner when the synchronous belt is started to avoid internal control power damage and machine distortion caused by gear slippage.
Storage environment:
If the synchronous belt does not work for a long time, attention should be paid to the storage environment to avoid aging of the synchronous belt caused by direct sunlight and humid environments.
| Series |
P14M series |
| Pitch |
14mm |
| Belt Thickness |
10.00mm |
| Tooth Height |
6.00mm |
| Tooth Type |
Parabolic Tooth |
| Tooth Range |
69~354 |
| Length Range |
966~4956mm |
| |
|
| Material |
Rubber/ PU(Polyurethane) |
| Types |
Close End Timing Belts |
| Usage |
Transmission System |
| Brand |
COMRAY/OEM |
Audited Supplier 
){kind=link}
){kind=link}